1900 ADWS slitting machine

The professional 1900 ADWS slitting machine is designed for fast and precise cutting of a wide range of media. The main focus was on excellent cut edges for self-adhesive films, digital print media, flock films, flex films and similar materials. These can be cut to a minimum width of 50mm at the left end of the film. The continuous swivel shaft can be operated almost effortlessly and easily, and the threading and unthreading of empty cardboard tubes or finished film rolls takes only seconds.

The adjustable end position of the swivel shaft ensures ergonomic working even for small employees. An automatic pneumatic clutch ensures vibration-free slitting. The 1900 ADWS is equipped with a rolling blade that can be locked if required. It is mounted on a smooth-running axial slide and can be easily positioned by means of two digital displays for a relative and absolute dimension. By pressing a button with the left hand, the axial slide is blocked and the film roll is tensioned; with the right hand, the film roll can now be slit. A line laser is optionally available to indicate the blade position on the media roll, as well as a new type of jaw lubrication system, which directly and sparingly wets the blade with a lubricant, and permanently cleans and brakes the blade. This system leads to significantly better slitting results for most media. Clamping of the slitting shaft is done automatically by compressed air. Depending on the desired mode of operation, various slitting modes are available – for example, the knife can be permanently blocked axially while the film rolls can be changed, or the film remains tensioned while the blade can be repositioned.

Film rolls with a diameter of up to 280 mm can be cut. The 1900 ADWS can handle rolls up to 1900mm wide. The machine is controlled via the internal controller and can be supplemented by the extensive ConvertPlus software.